Features:
PROTECTION: 16 feet / 5 meters in fresh or saltwater
WEIGHT: Approximately 400g
MEASUREMENTS: 3.8x24CM
9.5kHz TECHNOLOGY VLF BATTERY: 1000mAh Li-Po Rechargeable
BATTERY LIFE: 14 HOURS ON FULL CHARGE
Automatic or manual ground balancing (retune) RAIT Audio/Vibration/LED Beam Lights ALARMS
INDICATIONS: Battery Level, Lost Alarm.
POWER SWITCH (ON/OFF), ALARM MODES CONTROL, SENSITIVITY (4 LEVELS) LED flashlight, re-tune (when power is turned on)

The post Quest XPointer MAX appeared first on Golden Spark Detectors | Dubai UAE.

Powerful BRAIN
​
HYPERQ: Transmit multiple essential frequencies to the ground at the same time, ranging from 7 to 80kHz.

Increased detection frequency. The HYPERQ platform can deliver multiple frequencies, including signals up to 80kHz, at the same time, allowing it to find fainter targets deeper and with greater precision in difficult conditions. This is made possible by the use of a high-performance microcontroller unit (MCU) with a 480MHz speed Cortex-M7 STM32H750 series, as well as a low latency and low noise Texas Instruments 4 channel 768kHz sampling rate ADC5140.

Noise cancellation on the fly. We can run high-accuracy automatic noise cancellation with just one click thanks to the high-speed processing capability. In just 10 seconds, it will choose the quietest channel for the upcoming detection.

With the gyro sensor, you can:
Start automatic ground balance without pressing any buttons.
After 5 seconds of inactivity, enable automatic power-saving mode.
Improve accuracy by using motion detection to measure swing speed and angle.

Sun readable: The more sunlight there is, the more detail you will be able to read. You won’t miss anything with a viewable angle of up to 60 degrees.

High response time: A fast response time is essential for detecting activity. The results will be displayed to you immediately.

Power consumption is extremely low: Unlike other matrix pixel displays, the reflective LCD consumes less than 10um power, allowing for more swings at the ground.

Backlight: The device includes a backlight that can be activated in low-light conditions.

Portability and ease of use. The detector is small and lightweight, making it simple to retrieve and store in your backpack. The patented “SUPER 3D Telescopic” rod set is flat-foldable, allowing for maximum mobility and adjustability while maintaining a minimal physical structure.

Individualized comfort. Because both the control box and the armrest are fully adjustable for personalized comfort, comfort is a top priority. Furthermore, all parts are interchangeable for future maintenance.

CNC machined components. Precision is essential, as the detector is built with industry-standard aluminum and precisely CNC-machined parts. The shaft is divided into four sections without sacrificing lightweight design.

V series metal detectors have the best weight-to-size ratio design in the industry. The original T-style handle and shaft provide the most accurate detecting experience.

The V80 will weigh 1140 grams with the Blizzard9 coil and 1266 grams with the Blizzard11 coil.

USB RECHARGEABLE PORTS
Say goodbye to commercial batteries that are both expensive and harmful to the environment. We were the first to incorporate rechargeable USB type-c batteries into metal detectors. Charge your detector with a wall charger or while outdoors with a power bank or solar pad.

LOUDSPEAKER THAT IS WATERPROOF
The detachable design allows underwater detectorists to easily replace broken ones.

SPECIFICATIONS

The post Quest V60 appeared first on Golden Spark Detectors | Dubai UAE.

Powerful BRAIN
​
HYPERQ: Transmit multiple essential frequencies to the ground at the same time, ranging from 7 to 80kHz.

Increased detection frequency. The HYPERQ platform can deliver multiple frequencies, including signals up to 80kHz, at the same time, allowing it to find fainter targets deeper and with greater precision in difficult conditions. This is made possible by the use of a high-performance microcontroller unit (MCU) with a 480MHz speed Cortex-M7 STM32H750 series, as well as a low latency and low noise Texas Instruments 4 channel 768kHz sampling rate ADC5140.

Noise cancellation on the fly. We can run high-accuracy automatic noise cancellation with just one click thanks to the high-speed processing capability. In just 10 seconds, it will choose the quietest channel for the upcoming detection.

With the gyro sensor, you can:
Start automatic ground balance without pressing any buttons.
After 5 seconds of inactivity, enable automatic power-saving mode.
Improve accuracy by using motion detection to measure swing speed and angle.

Sun readable: The more sunlight there is, the more detail you will be able to read. You won’t miss anything with a viewable angle of up to 60 degrees.

High response time: A fast response time is essential for detecting activity. The results will be displayed to you immediately.

Power consumption is extremely low: Unlike other matrix pixel displays, the reflective LCD consumes less than 10um power, allowing for more swings at the ground.

Backlight: The device includes a backlight that can be activated in low-light conditions.

Portability and ease of use. The detector is small and lightweight, making it simple to retrieve and store in your backpack. The patented “SUPER 3D Telescopic” rod set is flat-foldable, allowing for maximum mobility and adjustability while maintaining a minimal physical structure.

Individualized comfort. Because both the control box and the armrest are fully adjustable for personalized comfort, comfort is a top priority. Furthermore, all parts are interchangeable for future maintenance.

CNC machined components. Precision is essential, as the detector is built with industry-standard aluminum and precisely CNC-machined parts. The shaft is divided into four sections without sacrificing a lightweight design.

V series metal detectors have the best weight-to-size ratio design in the industry. The original T-style handle and shaft provide the most accurate detecting experience.

The V80 will weigh 1140 grams with the Blizzard 9″ coil and 1266 grams with the Blizzard 11″ coil.

USB RECHARGEABLE PORTS
Say goodbye to commercial batteries that are both expensive and harmful to the environment. We were the first to incorporate rechargeable USB type-c batteries into metal detectors. Charge your detector with a wall charger or while outdoors with a power bank or solar pad.

LOUDSPEAKER THAT IS WATERPROOF
The detachable design allows underwater detectorists to easily replace broken ones.

SPECIFICATIONS

The post Quest V80 appeared first on Golden Spark Detectors | Dubai UAE.

The Quest Scuba Tector Pro folds easily in order that you usually have an area in your suitcase to require with you on vacation. With the Scuba Tector Pro, you and your children can have fun on the beach and within the water. With the supplied stem adapter, you’ll easily attach any 21-23mm stem, whereby you’ll determine the length yourself. it is the perfect handheld detector for snorkeling. Professional divers can take the Scuba Tector Pro with them at depths, up to 60m underwater! With its search frequency of 95 kHz, the Scuba Pro is incredibly sensitive to the tiniest pieces of jewelry. you’ll feel the vibration, see it through the illuminated display, and even hear if an object is hidden by means of a pulsating sound. you’ll also adjust the sensitivity/search depth in 4 levels.

Compare to the Scuba Tector, the STP’s coil is 2 times larger but only 1/2 when folded. You can carry it easier during your traveling and get more coverage when you are detecting.

FREE TO TILT

The patented dual-hinge design protects the cable from piercing or scratching and easy to adjust the angle. The Quest Scuba Tector Pro includes a built-in 1000mAh lithium battery and may be easily charged with a Type C USB cable. With a complete length of 43cm (folded 25cm) and a weight of 490g, the diving device fits in every bag or suitcase and may therefore be taken on every adventure, regardless of where you go or stand!

Scope of delivery:

Quest Scuba Tector Pro metal detector

• Coil protection
• Anti-loss spiral cable with fastening screw
• Wrist strap
• Linkage adapter
• USB charging cable
• Underwater find bag
• Operation manual
• 2-year warranty

TECHNICAL SPECIFICATIONS

The post SCUBA TECTOR PRO appeared first on Golden Spark Detectors | Dubai UAE.

The leading industrial layout lifted the bar again. The bold and elegant control box with a new front mudguard provides the enthusiasm and demand of any serious metal detectorist to be fulfilled.

FloatResin

In order to make it lightweight and thus robust to last long, FloatResin Chemical technology is specifically designed for filling metal detector coils.

TurboD

Coils are paired to have greater penetration and better resistance to mineralization with two kidney form coils

BALANCED DESIGN

Metal detectors from the X series have the best configuration in the industry for weight ratio. The best detection experience is provided by the original T-style handle and shaft.

CONVENIENT PORTS

AUDIO JACK 3.5mm

If your WIREFREE headphones are out of control, it is easy to source a 3.5mm audio port.

RECHARGEABLE USB

Get rid of commercial batteries that are costly and not environmentally friendly. We are the first to launch metal detectors with a USB rechargeable battery. By wall charger or by Power Bank, solar pad when outdoor, you can give your detector a refreshing charge.

SMART STRUCTURE FOR YOU AND YOUR KIDS

The imaginative and straightforward approach helps you and your child to share X10.  Just take the middle rod off and it’s your child’s perfect detector.

Technical Specifications

The post Quest X10 appeared first on Golden Spark Detectors | Dubai UAE.

• Speeds recovery with precise tracking
• Automatically adjusts for maximum sensitivity
• Audible and vibrating alarms as you close in
• LED flashlight for low-light conditions
• Water-resistant design
• Alert after 3 minutes of standby
• Low battery alert
• Auto calibration
• Alarm mode adjustment button

Specifications

The post Quest XPointer appeared first on Golden Spark Detectors | Dubai UAE.

Features

• LED/Buzzer/Vibration Alert
• Li-Poly battery built inside shell
• For 60M/200f under salt water operation
• Ribbed and ergonomic body
• Easy to use two buttons control
• Lost alarm
• Lanyard attachment loop cap
• Target locking function
• LED flashlight

Specifications 

The post Quest XPointer Pro appeared first on Golden Spark Detectors | Dubai UAE.

Included:

• 11″ x 9″ RaptorS TurboD
• Wire-Free Lite Headphones
• Magnetic USB Charge Cable
• Audio Adaptor
• Screen Protector
• Rod Set
• Armrest
• Quest Stickers

Features

• 5M/16FT Underwater Submergible
• 3 Selectable Frequencies (5kHz-13kHz-20kHz)
• Smart Devices Compatible W/ Free APP
• Built-in USB Rechargeable Li Battery
• Optimized Saltwater Performance
• Low Lag Wireless Headphone
• Lightweight and Ergonomic
• Real-time Ground Effect Monitoring
• Adjustable Rubber Handle
• Fast Release Cam-Lock, 3 Section Rods
• LED Search Light and LCD Backlight
• Deep Penetration TurboD Coil
• LCD Backlight for Low Light Detecting
• Fit Left or Right-Hand Operation

Specifications

The post QUESTPRO appeared first on Golden Spark Detectors | Dubai UAE.

In order to make it lightweight and thus robust to last long, FloatResin Chemical technology is specifically designed for filling metal detector coils.

TurboD Coil

Coils are paired to have greater penetration and better resistance to mineralization with two kidney form coils.

WIREFREE AUDIO

Since 2015 the first wireless technology we have integrated into metal detectors has taken place in the industry.

CONVENIENCE

Since the beginning of product design, we’ve considered all things for you. And you are able to quickly locate accessories or parts.

AUDIO JACK 3.5mm

If your WIREFREE headphones are out of control, it is easy to source a 3.5mm audio port.

RECHARGEABLE USB

Get rid of commercial batteries that are costly and not environmentally friendly. We are the first to launch metal detectors with a USB rechargeable battery. By wall charger or by Power Bank, solar pad when outdoor, you can give your detector a refreshing charge.

Features

Waterproof IP66 Protection

Intuitive System for Operation

USB Rechargeable Li Battery Built-In

The output of Optimized Saltwater

Wireless Headphone Low Lag

Lightest and Ergonomic Weight

Monitoring Real-time Ground Impact

Adjustable ergonomic handle

Cam-Lock for Quick Escape, 3 Section Rods

TurboD Coil with Deep Penetration

Operation Left or Right-Hand Fit

Technical Specifications  

The post Quest Q40 appeared first on Golden Spark Detectors | Dubai UAE.

A rechargeable 3000mAh Li-Po battery that provides up to 14 hours of detection power is powered by the Quest Q30 detector. A durable magnetic USB that is corrosion-resistant enables you to recharge your computer easily.

On an adjustable LED-backlit screen with two levels of brightness for low light conditions, this machine has a depth reader, metal ID indicator, and battery status. Automatically ground balance your detector by pumping it, or manually pick the suitable balance.

A 15-level volume control and vibration functions are also included. Through the 3.5mm headphone connector, the detector can be used with wired headphones.

A rechargeable 3000mAh Li-Po battery powers the Quest Q30 detector for up to 14 hours of detecting time. You can effortlessly recharge your machine using a long-lasting, corrosion-resistant magnetic USB.

The Quest Q30 is an extremely user-friendly and simple-to-use metal detector that can be used by anyone, young or old, expert or unskilled. The Q30 includes all of the essential features, including pinpointing, iron discrimination, and iron volume, as well as item identification Id ranging from 1 to 99, display lighting, volume control, and even a vibration function as a detection signal. The vibration feature is useful for the deaf and for searching in noisy situations. If there’s nothing visible on the monitor when searching underwater, the vibrations will notify you if there’s something there.

The Q30 is a highly light, yet very stable metal detector because to its low weight. If you’re going to be traveling with your metal detector for several days, this is a great option. The boom is made up of three parts: a telescopic boom, a handle, and click camlocks that allow you to simply modify the boom length and handle. The Q30 is easy to transport because it can be squeezed together into a small and compact package. As a result, the detector is also ideal for use by children or as a small hand-held detector. Your pinpointer’s holster can also be attached to your armrest. Your pinpointer and the metal detector Quest Q30 will constantly be together in this manner.

The Q30 can be linked to the QuestGo app through Bluetooth. You may track and document your detection activities with this app. You can also post your images to social media sites. The QuestGo application is available for free on Google Play and the App Store.

Scope of delivery:

• Quest Q30 metal detector
• 28 x 23 cm (11 “x 9”) Turbo DD RaptorX search coil
• Coil protection (already attached to the search coil.)
• Magnetic charging cable
• Manual
• 2-year warranty.

 TECHNICAL SPECIFICATIONS

The post Quest Q30 appeared first on Golden Spark Detectors | Dubai UAE.