It has a unique ground tracking system known as "XGB" (Xtreme Ground Balance - extreme ground effect compensation). To ensure stable operation, the system employs several ground points.
The GM24k also has iron and hot rock cancellation in audio modes, which extends the reach into the ground for quiet operation on more difficult terrain.
The post Goldmaster 24K appeared first on Golden Spark Detectors | Dubai UAE.
]]>
The Garrett Goldmaster® 24k (originally produced by White’s Electronics) is a gold nugget detector with high-frequency induction compensation.
The GM24k has a 54% increase in disk voltage compared to the previous White’s GMT model, resulting in increased sensitivity to small nuggets.
During the tests of this machine in Brazil, a tiny crystalline nugget of 0.4 grain found enclosed in quartz demonstrated it.
In some cases, this power can be difficult in heavily mineralized soil areas. Even at lower gain settings, the GM24k is an extremely “powerful” machine for detecting small gold nuggets and specimens.
FEATURES
- SENSITIVITY – Set the sensitivity at a level that does not result in false signals from the ground. Very strong ground may result in the symbol on the screen and a loud sound – this means the sensitivity is too high.
- GROUND BALANCE – With the default setting, the detector will use XGB to automatic ground balance. Tap to lock the ground balance to the current setting. Tapping when the ground balance is locked will update the current ground setting to what is under the coil.
- GROUND SCAN – Hold to put the detector into Ground Scan mode. The top bar displays the ground strength and the two digit numbers display the ground type (phase). Useful for tracing pay streaks. Sensitivity Adjust other settings FEATURES continued
- IRON CANCEL – Tap to silence hot rocks, trash and mineral changes in both audio modes. Hold to adjust the Iron Cancel setting (tap the button to cancel high-wrap hot rocks). Note that this setting may decrease the detector’s sensitivity to very small gold, but is necessary in difficult ground conditions.
- VOLUME and THRESHOLD – Tap to adjust the volume with the up and down buttons. Press and hold for one second to adjust the threshold with the up and down buttons (“TH” displays on the screen). With the volume at levels over 8 you can enable Boost 1 and Boost 2 for maximum sensitivity.
- AUDIO MODE – With the displayed on screen, the detector is in “BEEP” audio mode (high tone = good target, low tone = bad target). The default setting (without on screen) is a traditional All-Metal audio mode with greater sensitivity to small targets.
- SAT – SAT can smooth out ground inconsistencies. Press and hold for one second to adjust it (“SA” displays on screen, 2 is the default setting).
- PINPOINT – Hold for non-motion pinpoint mode. In difficult ground this mode may be affected by mineralization.
- BACKLIGHT – Tap to enable the backlight (this reduces battery life). 10. FREQUENCY SHIFT – Hold when turning the detector on to shift frequency (useful when there is EMI). Use and to change frequencies. Power off to save the selection.
- FACTORY RESET – Hold when turning on the detector. Press and hold button when “FD” is on screen to reset the machine to factory default.
The post Goldmaster 24K appeared first on Golden Spark Detectors | Dubai UAE.
]]>The post ACE 250 Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>To disregard undesired objects and detect specific targets, use the Accept/Reject notch.
Use an electronic pinpoint to recover targets quickly.
This would be ideal for a shallow pond or the fringes of a lake. It’s excellent for looking for antique coins, jewels, artifacts, and other treasures because it has Target ID functionality built-in, which alerts you to any potential finds. With the Garrett ACE 250, you can find the hidden treasure you’re seeking, whether you’re looking for items on an archaeological site or not. Complete with a padded handle grip, an adjustable S-style shaft, and an arm cuff.
Selection Modes:
- All Metal Mode (Zero Discrimination)
- Jewelry Mode
- Relics Mode
- Coins Mode
- Pinpoint Mode (When the Pinpoint button is pressed)
The post ACE 250 Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>The post ACE 150 Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>- Large graphic target ID LCD meter
- Sensitivity adjustment
- 3 levels of Tone ID
- Clear tone speaker and headphone socket
- Coin depth indicator
- Simple push-button controls with the easy touch-and-go operation
- Optional interchangeable Ace series search coils
Best-Selling Model at an Affordable Price
You may ignore the Garrett Ace 150 metal detector’s assertive attractive looks and still notice that it outperforms the competition in every way. Every characteristic and thoughtful feature you want to see in a high-quality metal detector is present in this tough equipment. It is simple to use, provides high-performance handling without the need for complicated settings and modifications, and has simple controls that make finding hidden treasures enjoyable, simple, and extremely gratifying. The 6.5 x 9″ Rhino Tough PROformance Interchangeable search coil is standard on the Garrett Ace 150.
The post ACE 150 Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>When you turn on the Garrett Axiom gold detector with integrated Ultra-Pulse technology, you can find gold. With the Axiom by your side, searching in highly mineralized areas with hot rocks and black sand becomes a little bit simpler. To make this pulse machine more versatile so you can look for both big nuggets and little pickers, Garrett timed the pulse frequencies. You may focus on the gold that may be hiding just out of reach with your current gold detector using the Fine, Large, Normal, and Salt settings. With a detector that weighs less than 5 lbs and a 16-hour battery life to match, you can spend more time detecting before you feel tired and add a few more nuggets to your gold vial.
The post Garrett Axiom Ultra-Pulse appeared first on Golden Spark Detectors | Dubai UAE.
]]>The Garrett Axiom metal detector advances the art of gold detection thanks to ground balancing technology. You may obtain an even more precise ground balancing setting using terra-scan. You can fine-tune the ground balance window by pumping it up and down, which is the normal ground balance process. This window gives the Axiom a bit more maneuverability in difficult terrain. Ground Track can be activated to assist you in staying automatically tuned to those tiny variations in ground mineralization after you have completed a manual ground balance. Before you travel on your next prospecting expedition, upgrade to the Axiom and become familiar with Ultra-Pulse technology, which can detect gold as little as 1 to 2 grains.
IRON CHECK
A brief illustration of how using a DD search coil and this capability with the Axiom enables you to audibly identify iron targets.
EXTREME BATTERY LIFE
Axiom’s built-in, high-capacity Lithium Ion battery offers twice the battery life of competing prospecting detectors, lasting roughly 16 hours on a full charge.
LENGTHEN YOUR STAY IN THE AREA!
The booster pack from Axiom can accommodate eight conventional or rechargeable AA batteries. In remote locations, use this pack to extend battery life by an additional 6 hours.
2 TYPES OF AUDIO
PWM audio or VCO audio are your alternatives. Watch this quick demonstration video.
GOLD: GET IT ALL WITH AXIOM, BIG OR SMALL!
The post Garrett Axiom Ultra-Pulse appeared first on Golden Spark Detectors | Dubai UAE.
]]>Garrett Pro-Pointer II With a new lost pinpointer alarm, increased durability, and sensitivity, Garrett’s new Pro-Pointer II has everything you’ve come to trust from the original… and more!
The post Pro-Pointer II appeared first on Golden Spark Detectors | Dubai UAE.
]]>Lost Pinpointer Alarm
After 5 minutes of being ON without a button press, the Pro-Pointer II will begin emitting progressively faster warning chirps for 60 minutes.
Auto-Off Feature
After one hour of warning chirps, the Pro-Pointer II will power off automatically.
Lanyard Attachment Clip
Use to attach the Pro-Pointer II to your belt, digging pouch, or your detector.
Increased Durability and Sensitivity
Faster Retuning Capability
Fast on/off cycles allows users to quickly tune out the detection of saltwater, wet sand, or highly mineralized ground. Retuning allows users to quickly: Shrink the detection field to precisely pinpoint large targets. Tune out mineralized ground, wet beach sand, etc.
Help gauge target size/distance
Help identify edges of large target
Pinpoint multiple targets versus one large target signal
OTHER KEY FEATURES:
- Patented proportional audio/vibration pulse indicates targets
- Pinpoint tip detection
- 360° side-scan detection area
- LED light for low light uses
- Patented scraping blade to sift through the soil to speed recovery
- Automatic tuning
- The large power button is easy to operate even with gloves
- Meets IEC 60529 IP 66 standards for dust and water protection. The entire unit can be rinsed/cleaned under water.
- Twice the battery life of other pinpointers with LED lights
- 9-volt battery included
- Woven belt holster included
Technical Specifications
| Model Name: | Garrett Pro-Pointer® II |
| Product Number: | 1166050 |
| Operating Temperatures: | -35°F (-37°C) to 158°F (70°C) |
| Operating Frequency: | 12 kHz |
| Environmental Rating: | Weatherproof; IP 66 |
| Tuning: | Automatic |
| Indicators: | Proportional audio/vibration pulse rate |
| Controls: | Power switch |
| Dimensions: | Length: 9″” (22.9 cm) |
| Thickness: | 1.5″” (3.8 cm) tapered to .875″” (2.2 cm) |
| Weight: | 6.5 oz. (0.2 kg.), with battery in |
| Battery: | Single 9V (included) |
| Battery Life: | Carbon: 16 hours |
| Alkaline: 30 hours | |
| Rechargeable: 8 hours | |
| Warranty: | 2 Years, Limited Parts/Labor |
| Patent Information: | US 7,575,065; D583,261 and patents pending |
The post Pro-Pointer II appeared first on Golden Spark Detectors | Dubai UAE.
]]>SUBMERSIBLE TO 20 FEET! INCREASED SENSITIVITY!
The post Pro-Pointer AT appeared first on Golden Spark Detectors | Dubai UAE.
]]>
3 Sensitivity Levels
For enhanced gold nugget detection and other tiny targets
Lost Pro-Pointer Alarm
After being ON for 5 minutes without pressing a button, The Pro-Pointer II will begin emitting increasingly faster alarm chirps for 60 seconds
Auto-Off Feature
The Pro-Pointer II will automatically power off after one hour of warning chirps.
Faster Retuning Capability
Users can easily tune out the detection of saltwater, wet sand, or highly mineralized soil with short on/off cycles. Retuning makes it possible for users to quickly:
- Shrink detection field to reliably classify large targets
- Tune out mineralized dirt, sand on the wet beach, etc.
- Assist in determining target size/distance
- Help define large target edges
- Pinpoint multiple targets versus one big signal target
OTHER PRO-POINTER AT FEATURES
Simple, single-button operation
Strength, Retune, Adjusting Sensitivity, and Stealth Mode for (vibrate only)
Ruler in Inches and Centimeters
Molded into the Pro-Pointer side to assess the target depth
Lanyard Attachment Loop
Molded into the Pro-Pointer side
Proportional Audio/Vibration Patented
Patented soil-search scraping blade
Twice the battery life of LED lights on other pinpointers.
Pinpointing tip and the area of 360° detection
Includes woven belt holster and battery with 9 volts
The post Pro-Pointer AT appeared first on Golden Spark Detectors | Dubai UAE.
]]>Continue reading SuperWand Hand-Held
The post SuperWand Hand-Held appeared first on Golden Spark Detectors | Dubai UAE.
]]>Features
- Optimum sensitivity: detects weapons, contraband, and other metal artifacts from ferrous, non-ferrous, and stainless steel.
- Self-calibration: The need for periodic sensitivity changes is removed by digital microprocessor technology.
- For fast scanning from head to foot, the elongated profile offers an 8.75″ scan area with 360 ° detection coverage plus tip pinpointing.”
- With a single-touch button and three-color LED lights, it is simple and convenient to use. Green LED light indicates ON; LOW BATTERY indicates Amber LED: Warning indicates red LED.
- Clear audible or LED alarm signal Silent/Vibrate.
- Rugged injection-molded construction for added impact absorption, including a structurally separated coil. It exceeds Process 516.5, Procedures II, and IV of Mil-Std-810F (drop test).
- The grip, ergonomically built, fits comfortably in almost every hand size.
- Simple battery cover for ON/OFF: standard 9V battery included. There is an optional rechargeable battery pack.
- The power switch and LEDs are located for quick access and high visibility.
Specifications
Operating Temperatures
-35° F (-37° C) to 158° F (70° C)
Humidity
To 95% noncondensing
Operating Frequency
95 kHz
Audio Frequency
2 kHz
Tuning
Automatic
Indicators
Silent / Vibrate
Audible Speaker
LED Alert Lights
Green: Power ON
Amber: Battery LOW
Red: ALARM condition
Controls
3-Way switch
- On (Speaker / LED Light)
- Off
- On (Vibrating / LED Light)
Battery
A single 9-volt battery provides up to 80 hours of normal operation.
Optional NiMH rechargeable battery provides up to 20 hours on
each 12-hour recharge
Warranty
Limited, 24 months of parts and labor
Dimensions
| Width: 3.25″” (8.3 cm) |
| Thickness: 1.25″” (3.2 cm) |
| Length: 19″” (48.3 cm) |
| Weight: 18.6 oz (527 g) |
The post SuperWand Hand-Held appeared first on Golden Spark Detectors | Dubai UAE.
]]>Part No.1165190
Garrett's Super Scanner was originally developed for use at the 1984 Olympic Games and is the world's most known hand-held metal detector.
The post Super Scanner V Hand-Held appeared first on Golden Spark Detectors | Dubai UAE.
]]>- Ultimate sensitivity senses a medium-sized 9″ distance; large knife from 6″ knife; 3″ distance; foil-wrapped drugs and tiny jewelry from 1″ foil-wrapped drugs and tiny jewelry.
- Self-calibration The need for periodic sensitivity adjustments is eliminated by digital microprocessor technology.
- Rugged, high-impact ABS case with strengthened coil compartment. It exceeds Process 516.5, Procedures II, and IV of Mil-Std-810F (drop test).
- Large 8″ scan surface for quick, detailed scanning.
- No tools are needed to change the standard 9V battery (included). Optional rechargeable battery package.
- The detection of metal is indicated by a sharp audible alarm and a bright red LED.
- A momentary push-button, such as rebar, or metal walls, helps temporarily eliminate the detection of nearby ambient metal.
- Three-color LED indicator Green LED indicator ON; Amber LED indicator LOW BATTERY: Red LED indicator ALARM.
- Temperature of operation -35 °F (-37 °C) to 158 °F (70 °C)
Dimensions
| Width: 3.25″” (8.3 cm) |
| Thickness: 1.625″” (4.13 cm) |
| Length: 16.5″” (42 cm) |
| Weight: 17.6 oz (500 g) |
The post Super Scanner V Hand-Held appeared first on Golden Spark Detectors | Dubai UAE.
]]>Recommended - Jewelry Hunting, Relic Hunting, Competition Events
Garrett has placed big features into the ACE 300i—Digital Target ID, better detection abilities, a new audio system, and more—for a price that can’t be beat.
The post ACE 200i Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>- 16.5 x 23cm (6.5″” x 9″”) PROformance
submersible searchcoil (as shown)
Key Features
- Digital Target ID: 0 to 99 scale offers target information
- 18 x 25cm (7″” x 10″”) PROformance submersible searchcoil offers more coverage, depth
- Higher frequency (8 kHz) provides better sensitivity on low and medium-conductivity targets (i.e. gold, lead)
- Increased Iron Resolution: 3x the iron resolution of an ACE 250, to help overcome target masking in iron-laden hunt sites
- Adjustable Frequency to help eliminate interference
- Camlocks for increased stem stability
- Includes Pulse-Width Modulation audio: sharper, more responsive audio
- Includes Electronic Pinpointing: precisely locates targets and speeds recovery
- Notch Discrimination: Modify discrimination patterns based on what you are seeking.
- Five Search Modes (plus Pinpoint)
- Eight (8) Sensitivity/Depth adjustments
- Coin Depth Indicator determines target depth
- Includes revised Target ID legend and Mode/Discrimination patterns to better suit the search needs of international users.
Specifications
| Digital Target ID | YES, 0-99 scale |
| Camlocks Included | YES |
| Target ID Cursor Segments | 5 |
| Iron Discrimination Segments | 1 |
| Notch Discrimination | NO |
| Search Modes | 3 |
| Sensitivity/Depth Adjustments | 4 |
| Electronic Pinpointing | NO |
| Frequency | 6.5 kHz |
| Audio Tone ID Levels | 3 |
| Standard Searchcoil | 16.5 x 23cm (6.5″” x 9″”) PROformance |
| Length (Adjustable) | 1.016 m – 1.3462 m (40″” to 53″”) |
| Total Weight | 1.27 kgs. (2.75 lbs.) |
| Batteries | 4 AA (included) |
| Warranty | 2 Year, Limited Parts/Labor |
The post ACE 200i Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>
The actual SIZE and DEPTH of the target are shown by Garrett Exclusive Graphic Target Imaging™ (GTI). This helps you to dig trash for less time and dig gold for more time.
The post GTI 2500 Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>
Include:
- 9.5″” Imaging submersible search coil PROformanceTM
- DVD of Instructional GTI 2500.
Key Features
- True target size and depth is shown by Graphic Target Imaging (GTI).
- The Graphic Target Analyzer (GTA) identifies the conductivity of the target
- True Digital Signal Processor (DSP) increases the accuracy of discrimination.
- Based on quest coil swing pace, ScanTrack optimizes treasure signals
- Ground Balance: automatic and also adjustable manually
- Deepseeking Mode for All Metal, Non-Motion: allows hovering over the target
- Volume, threshold, tone, sensitivity, discrimination User-adjustable
- Salt Elimination Aid: Elimination of interference at the beach caused by wetted salt
- Hip Mount Battery Pack: for long searches, decreases detector weight
- For use in All Metal Mode, FastTrack Ground Balance
- Elimination of Surface: Flexible search aid ignores shallow, unwanted objects
- LCD Backlight: LCD screen illumination for enhanced visibility
- Headphone Jack and external speaker: quarter-inch (1/4″”) size
- Coin Alert BeltoneAudio: Garrett sound for targets with high conductivity
- Switching from the last mode: switch from All-Metal to last-used discrimination mode
Technical Specifications
| Target ID Cursor Segments | 24 |
| Iron Discrimination Segments | 3 |
| Accept/Reject Discrimination | Yes |
| Search Modes | 5 (plus Imaging/Pinpoint) |
| Sensitivity/Depth Adjustments | 24 |
| Electronic Pinpointing | YES, with size/depth display |
| Frequency | 7.2 kHz, user-adjustable |
| Audio Tone ID Levels | 3 |
| Standard Searchcoil | 9.5″” PROformance Imaging |
| Length (Adjustable) | 40″” to 51″” (1.01m – 1.29m) |
| Total Weight | 4.6 lbs. (2.1 kgs.) |
| Batteries | 8 AA (included) |
| Battery Condition Indicator | YES |
| Warranty | 2 Year, Limited Parts/Labor |
The post GTI 2500 Metal Detector appeared first on Golden Spark Detectors | Dubai UAE.
]]>